HUGO TC200 Main Features :
Max Wattage 200W
Ni200/ Titanium Temperature Control mode / Wattage Mode/MECH Mode
Integrated TCR advanced
Input High Voltage Warning
Low Voltage Protection
Output Short-Circuit Protection
Low Resistance Protection
Reverse Battery Protection
Size: 102*65*25 mm;
Net Weight: 185g;
Material: Aluminum+Stainless Steel
Variable Wattage Range: 1.0W - 200.0W
Output Voltage Range: 0.5V -8.4V
The maximum current : 40A
Battery Voltage Range: 6.0V - 8.4V
Battery : 2*18650 high-drain batteries
Temperature Adjustment Range: 100-300°C / 200-600°F
Atomizer Ohm Range: 0.06 ohm -3.0ohm
Note: It is recommended to use LG/SONY/SAMSUNG 35A high-drain batteries.
1× HUGO200 TC mod
1× Warranty card
1× User manual
1× Gift box
How to operate?
1.Power On/Off:Clicking on FIRE buttons 5 times within 3s, “Power On or Power Off” with “HUGO200”or “STANDBY”LOGO.
1.Battery Installation: Pushing down magnetic back cover, then putting in IMR18650(make sure the battery positive and negative pin,it is in SERIES )
2.Mode Change: Clicking on FIRE button 3 times continuously within 3 seconds while you are under working status,then click on UP or DOWN button for changing mode “TEMP
NI”,“TEMP TI”, “WATTS MODE”, “MECH MODE,finally click on FIRE button for mode confirmation.
3.Display Rotation:Clicking on FIRE and UP buttons in 3s,the display will rotate 180°,if not fit your handedness,
repeat it again.
4.Normal/Stealth Mode:Clicking on FIRE and DOWN in 3s,the display will display “Normal Mode”,or “Stealth Mode”,leave it sit what you want.
1.Due to NI or TI resistance wire has different performance(TCR), so we have added temperature compensation feature into
programme,Pressing FIRE,UP and DOWN 3 buttons at the same time under “TEMP NI”or “TEMP TI”mode,it will show “10-100F”as temperature
* TEMP NI: Default Value 69F.
* TEMP TI: Default Value 55F.
Contach: Cathy Wang